)
)
)
)
ANDIAMO 2.XT is a 32-channel AES and MADI A/D D/A converter with 32 analog and 16 AES3 I/Os that delivers exceptional sound quality.
The device is housed in a compact 2U 19” casing for efficient use of rack space.
ANDIAMO 2.XT is also available in an SRC version with sample rate converters at the AES3 inputs switchable in groups of eight channels to handle asynchronous signals.
An internal routing matrix enables any input port to be connected to any output port for simultaneous conversion between analog, AES and MADI. Converter sensitivity can be switched from high to low (hi/lo) – discrete for A/D and D/A.
The device may be operated locally or remotely via the ANDIAMO Remote software. Supported remote methods are USB, D.O.NET, ‘MIDI over MADI’ and ‘Serial over MADI’.
ANDIAMO Remote (Windows® / OS X®) offers access to the following features:
- Matrix Mode which offers free signal routing on a per-channel basis.
- 4 FS support – the device supports sample rates from 44.1 kHz up to 192 kHz to meet the highest sonic demands
- Level control – output gain/level trim for individual channels
- AD/DA calibration in 0.1 dB increments for precise adjustment of AD and DA converter reference levels
The settings and the routing matrix are stored inside the device.
PORT REDUNDANCY
ANDIAMO 2.XT is equipped with two MADI ports as standard, offering seamless port redundancy and switchover. Both MADI ports are always active and carry the same MADI data, except when the Extended Routing feature is deployed.
EXTENDED ROUTING
The Extended Routing feature enables both MADI I/Os to be used independently to:
make full use of all conversion channels at higher sample rates (96 kHz)
double the range of available MADI input channels
create two individual MADI feeds
QUICK OVERVIEW
The front panel provides level control and status LEDs for real-time monitoring of signal condition for all input and output channels.
CLOCKING
Selectable clock sources are word clock, AES input, MADI input or the internal clock. The current system clock is provided at the word clock output at any time.
ADAPTABLE
The device may be configured to order as follows:
- Version "A": +06 dBu / +15 dBu
- Version "B": +09 dBu / +18 dBu
- Version "C": +15 dBu / +24 dBu
SAFE OPERATION
Thanks to two phase-redundant power supplies with separate IEC inlets and AC power switches on the rear panel the device offers the highest reliability.
TECHNICAL DATA
|
Interfaces |
|
|
MADI ports (I/O): |
2 x SC-Socket multi-mode |
|
AES3 ports (I/O): |
4 x DSUB-25 (16 x AES3) |
|
Analog (I/O): |
8 x DSUB-25, balanced, AES59 compliant |
|
Digital |
|
|
Sample rates: |
44.1, 48, 88.2, 96, 176.4, 192 kHz (+/- 12,5%) |
|
MADI formats: |
48k / 96k Frame, 56 / 64 channel, S/MUX |
|
Sample rate conversion |
16 x stereo @ AES inputs (switchable) *see notes |
|
THD+N: |
140 dB |
|
Frequency response ripple: |
< 0.025 dB |
|
Latency: |
<140 samples |
|
Analog |
|
|
Analog Level (I/O): |
+6 dBu / +15 dBu (digitally switchable) or |
|
A/D |
|
|
SNR: |
< -115,5 dB RMS (20 Hz - 20 kHz) / -118 dB(A) |
|
THD @ -1 dBFS: |
< -113 dB |
|
Frequency response: |
< -0,15 dB (10 Hz) / -0,15 dB (20 kHz) |
|
D/A |
|
|
SNR: |
-113,5 dB RMS (20 Hz - 20 kHz) / -116,5 dB(A) |
|
THD @ -1 dBFS: |
-100 dB |
|
Frequency response: |
-0,5 dB (10 Hz) / -0,15 dB (20 kHz) |
|
Sync |
|
|
Word clock (I): |
1 x coaxial BNC (75 Ω termination switchable), AES11 (DARS also supported) |
|
Word clock (O): |
1 x coaxial BNC |
|
Communication |
|
|
Remote Software: |
ANDIAMO REMOTE (Windows® & OS X®) |
|
Remote Methods: |
USB, Serial over MADI, MIDI over MADI, DONet |
|
Global |
|
|
Service: |
USB 2.0 for firmware updates (Windows®) and remote control (Windows® & OS X®) |
|
Power supply: |
2 x 84 V to 264 V AC / 47 Hz to 63 Hz / safety class 1, phaseredundant |
|
Power Consumption: |
40 W |
|
Dimensions: |
Width 19'' (483 mm) |
|
Weight: |
about 4 kg |
|
USB Serial driver: |
Windows® & OS X® |
|
Device variants |
|
|
Single-mode: |
MADI port: SC-Socket single-mode |
|
Notes |
*ANDIAMO 2.XT SRC only |